Saturday, January 23, 2016

Keep up to date with TeraGanix online!

TeraGanix has a LOT to say and share! We have created blogs for specific subjects to streamline information. If you are interested in it all, please check out the various blogs we have and subscribe to the ones you like and share with friends.

Here is a list of our blogs:

ProEM1/Digestive Health: Here we discuss digestion, new probiotic and prebiotic information, health, exercise, food preparation, and other topics of healthy lifestyles.

Bokashi: In this blog we discuss food waste recyling, recycling, uses of bokashi in the US and around the world.

TeraGanix: This blog covers a wide range of topics that involved EM Technology in some way.

Effective Microorganisms: This blog mostly focuses on household uses of Effective Microorganisms, including growing vegetables, lawn care, growing flowers, have a healthy home, etc.

Don't forget the TeraGanix Facebook page or our YouTube Channel!

Subscribe to them all and enjoy!

Wednesday, November 3, 2010

Skunk Odors

It's fall now and this time of year is notorious for skunks.  Besides my own experience with my cat getting sprayed by a skunk, I have received a few phone calls in October about pets coming face to tail with a skunk.

About two weeks ago I received a call from one of our clients who does all his work in agriculture.  He wanted to know if EM•1® would get rid of skunk odor.  The night before his dogs started barking around 1:30am.  A skunk had gotten in his fenced in yard.  Sure enough the skunk sprayed the dog right in the face...right outside his bedroom window.  I told him to get some of the EM•1®, dilute it out 1:10, and give the dogs a good bath.  For his yard, he should get a hose end sprayer and spray the whole thing down until the odor was gone.  He reported back to me that about 85% of the odor was gone on the first shot and it just took a couple more washes on the dog to get rid of it completely.

About 10 years ago, when I lived back East, a similar thing happened to me.  My cats were outside around 2 in the morning.  I heard a cat fight start and then the smell.  I opened the slider to let the cat in...he was soaking wet...the skunk came in and a possum followed (I didn't know they traveled together!).  My wife and I chased the possum and skunk out of the house.  Luckily the skunk did not spray in the house, but it did run under our couch and chair, getting them pretty stinky!  My eyes teared up pretty bad.

I grabbed my cat in one hand and a gallon of some Activated EM•1® I had.  I put him in the tub and poured the AEM1 all over him.  The odor was gone instantly.  And, the cat didn't seem to mind one he noticed the odor was gone....  After that, we went through the rest of the house spraying everything where the cat or the skunk had rubbed against.  It was like magic.

Friday, January 15, 2010

Cat Urine

This morning I woke with my wife say, "Why am I wet?  This feels wet!  Did you wet the bed?"  Both of the kids, my son is 8 and my daughter is 5, had crawled into bed sometime during the night.  So, they were the obvious suspects.  After a quick check, we found out it wasn't either of them.  So, being the wise guy I usually am, I asked my wife if it was her...  That didn't go over too well.  She was in no mood since her side of the bed was soaked.

It turns out that some time in the night the cat, who had been laying on top of the comforter, urinated on the bed.  The urine had soaked through our comforter, our down blanked, a top sheet and and another blanket and into the mattress.

We striped the bed and dowsed it with some Activated EM•1®.  Between all the sheets and the mattress, we used about 16 ounces of Activated EM•1® on everything.  The odor is gone and now its time to clean everything in the wash.  I'm not sure what I would have done if we didn't have EM®!


Wednesday, December 9, 2009

Try using EM•1® on your car

Remember that EM•1® has all those great antioxidants?  Well, when put in contact with metal and oxidized paint, it can do wonders to buff up a nice shine on your car and help prevent it from rusting!

Here are some ideas:
  • The carpets can be washed with an EM•1®/water/soap solution
  • If you're sensitive to chemical smells and bought a new car, or rented one, EM•1® can be sprayed to get rid of any odors inside.
  • EM•1® can be diluted and used as a window cleaner.  It is safe on tinting.
  • EM•1® will eat oil and transmission stains on concrete.  It takes repeated spraying and some time, but it will do it.
    • EM•1® Bokashi can be used to soak up oil on the ground and on concrete flooring.  Once it is soaked up, you can add it to a compost pile.  In about a month, the oil will be completely broken down.
  • EM•1® will eat the grease under the hood and can even be used as a line cleaner.  To speed up the process add two-three ounces of soap per gallon of liquid when spraying.
    • Start with testing dilution rates, maybe a 1:10 dilution.  If that works, try a 1:20 and keep backing off until it doesn't work.  If you repeatedly spray(daily or so), it will take less every time.
All these applications for for boats, motorhomes, buses, planes, etc.

Let us know what you've tried and what's worked.

    Friday, December 4, 2009

    Composting with EM1

    I received an email yesterday questioning the instructions on our label for composting.  The question was mostly about converting weight to volume in order to figure out how much EM1 to use.  I'll try to explain this here.  I've included the questions from our customer:
    • "1.5 gal per cubic yard" seems to refer to using the product in a gallon of water, at least I think.
    The way we came up with this calculation was to back down from a cubic yard (pretty much 1 ton or 2000lbs) of material.  We generally use 1.5 gallons of *Activated EM•1® per ton or cubic yard of waste materials.  Water is also added to reach the desired moisture levels, generally around 60-65%.

    1 cubic yard = 27 cubic foot

    *The 12oz bottle you bought will make roughly 3 gallons of Activated EM1.
    • What does " 1oz/10lbs" refer to?  10 lbs of what? Compost?
    Yes, it does.  Using 2,000lbs as 1 ton, you can figure out the rough weight of EM1 to use, especially if you just purchased "x" yards of manure and/or soil.
    Also, a 5-gallon bucket generally holds about 25lbs of moist material (food wastes, etc.)




  • I would appreciate it if you could provide clear instructions on using this product in a garden compost bin. I use a 32 gallon plastic compost bin. It is now full. I add to it from time to time as needed to keep it full.



  • According to this calculator your bin contains 4.277777792 cubic feet.  So, you'll need 40 to 43 ounces of Activated EM•1® to treat your entire bin.

    Does this help explain things?  When I used to garden, I was usually doing things on a pretty large scale for a homeowner.  I was working with cubic yards of materials.  For instance, I ordered 20 yards of cow manure and sprayed it all down with AEM•1®.  I would add leaves to it and till it in, spraying as I layered it into the ground.  

    It took a few hard lessons of chickweed growing like crazy for me to learn a better method than trying to make piles that I had to turn, etc.  Instead, I dug trenches and back-filled with layered of leaves and manure and saturated each layer with AEM•1®.  When I got to the top of the trench, I flipped the soil from the hole on top and planted in it.  This process eliminated all problems with weeds and turning.

    Tuesday, December 1, 2009

    Koi Ponds

    Fish ponds tend to get pretty gunked up in the spring and the fall as temperature changes cause an inversion in the pond.  The much on the bottom gets stirred up as temperatures cause convection currents.  The water will get cloudy and oftentimes, if the outside temperature is just right, algae will start to grow.   If the algae gets out of control, it can cause a dissolved oxygen drop and pH shift in the water, causing some fish die off.

    EM•1® to the rescue!  There are a couple ways that the EM•1® helps with this.  Firstly, the live microbes in the EM•1® will begin to eat the sludge material, breaking down ligning and cellulose, proteins, etc. that are in the water.  Secondly, EM•1® acts very much like a natural polymer and it affects electroconductivity (EC) in the water, pulling solids out of suspension (TSS). 

    Take a look at this slideshow of a pond from Silver Street Studios in Houston:


    It took a bit of trial and error to figure out what was going on here, but you can see how clear the water got.  The entire process took a couple months, but it was worth the wait.

    Monday, November 9, 2009

    Eliminate Pet Odors with EM®



    Well, this house had a bit of pet odors and took a few passes, but we got everything controlled and fresh in an afternoon.  See how simple it can be.  If you've got any type of odors in or around your house, give a shot of EM® and you'll be glad you did.

    Thursday, September 24, 2009

    Spraying the lawn with Activated EM1.

    A new video on applying Activated EM1 to your lawn.

    Subscribe to our channel and get all the latest videos from EM America.

    Wednesday, August 19, 2009

    Sprouting seeds

    Sprouts are a nutritious food and are so easy to get going at home. I have seen a few places that just use regular dishes and damp towels to sprout seeds. Several grocery stores sell seed packs to sprout, some sell containers that you can use that make the process a bit less hands-on. It is fun to do and a great thing to teach children. Best of all, you can do it year-round so in the northern climates, you can get fresh foods any time. It only takes about 7 days for most seeds to sprout.

    The way I usually do this is to take a couple tablespoons of seeds and put them in about 1/2 cup of water with a tablespoon of EM•1®. I let the seeds soak for about 5 minutes and then I strain them. I put them on a damp towel and then fold over the towel and put it in a jar with the lid on.

    Once a day I take out the seeds and put them in a strainer and rinse them with fresh water. I then spritz them with a solution of EM•1® and water (1:4). As the sprouts are ready to eat, I pull out the ones that are ready and keep the rinsing process going until all the sprouts are gone.

    Tuesday, August 18, 2009

    Turning a new leaf

    If you're lucky enough to have lots of leaves, this is a great way use them for your gardens.


    • Rake up all the leaves you can get.
    • Mow them with a mower to chop them into small pieces.
    • For every cubic yard of material mix in the following:
    • 1 cup EM1
    • 1 cup molasses
    • 5 gallons of water
    • Cover with a large tarp and use rocks or logs to hold the tarp down.
    Let the material sit for at least two weeks. When you pull back the tarp there will likely be a bunch of white mold on the leaves. The material should also have a sweet/sour smell.

    You just make a huge pile of what we call EM1 Bokashi for about $2 in materials.

    The fermented leaves can be used as a mulch or incorporated into garden soil to add lots of carbon and beneficial microbes.

    If you really get carried away, collect the leaves from neighbors. Just have them bring over tarps of leaves. I am sure they would prefer to have you take them than to have to bring them to the dump. Better yet, teach your neighbors how to turn leaves into a resource and save the landfill space! The worms and your plants will love you for it!
     
    #